Sawing machines
The rail-guided sawing machines produce clean, exact cuts in cured concrete elements, fresh concrete or reinforced elements. It is used after processing to make apertures for doors, windows, cable and ventilation ducts in the precast concrete element.
Multi Angle Saw MAS
The multi-angle saw MAS is used to reduce the cured concrete elements to the required length. A range of cuts are possible - 0 degree or 180 degree cuts, plus diagonal cuts from 90 to 0 degrees and from 90 to 180 degrees. The saw speed is automatically set by the saw motor's electronic power control.
Each machine type can be configured for a track width of 1.2 m to 1.5 m or of 2.4 m.
Flexible diagonal cuts to specification
Automatic saw speed
Sturdy design
Right angle saw RAS
The right-angle saw RAS allows you to cut at right angles cured concrete elements on the production bed to the required plate length. Diamond saw blades with a diameter of 900, 1,100 and 1,300 mm are used for a pallet heights of 30 cm, 40 cm and 50 cm.
Each machine type can be configured for a track width of 1.2 m to 1.5 m or of 2.4 m.
Diamond saw blades
Simple machine operation
Fresh concrete saw FCS
The fresh concrete saw FCS is a simple saw model for longitudinal cutting of fresh concrete and specific plate widths, to produce widths narrower than the widths provided by the slip former. The saw blade is electrically driven. If you wish to save costs, it is also possible to install a second-hand diamond blade (Ø 1,100 mm or 1,300 mm). The machine is manually operated, has a roller guide and is fitted with a loose cable.
Each machine type can be configured for a track width of 1.2 m to 1.5 m or of 2.4 m.